Low-frequency response test device of electret condenser microphone
Abstract
Arterial pulse measurement using electret condenser microphone requires the standard to validate the value of the measurement. This standard requires the test device to reproducing the mechanical vibration to emulate the arterial pulse vibration. The main objective of this paper is to discuss the test device of electret condenser microphone using class A amplifiers and low-frequency loudspeaker. To validate this pulse measurement, this class a amplifier is examined under an experimental setup. The experiments showed that the device can be used as an alternative solution to generate the mechanical signal source to simulate the human arterial pulse.
Keywords
class A amplifier; electret condenser microphone; loudspeaker; low-frequency; test device;
Full Text:
PDFDOI: http://doi.org/10.12928/telkomnika.v18i3.14831
Refbacks
- There are currently no refbacks.

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.